Hyundai Getz hatchback cars have been produced by Korean automobile company Hyundai since 1992. You will find a stereo and an AM/FM radio receiver as well as a CD-player. You can upgrade your car’s stereo with a variety of aftermarket radios. You can install an aftermarket radio in your Hyundai Getz. All you have to do is modify the wiring and housing so that the radio fits and functions in your car.
Hyundai Getz hatchback cars have been produced by Korean automobile company Hyundai Auto since 1992.
- A Hyundai Getz can have an aftermarket radio installed by simply adapting its wiring and housing. The radio will fit in and work in the Hyundai Getz.
To remove the cable, twist the negative end of the car’s battery with an adjustable wrench.
The special U-shaped DIN Radio Removal Keys are to be inserted into each slot of the radio. The keys should be pushed in to engage. To release the radio, pull the keys inwardly and draw them towards you. The radio antenna cable should be unplugged. Unplug the wire loom.
Assemble your radio installation kit. The kit should be attached to the radio installation box, supplied with an aftermarket radio. Place the cage in the kit so that the top is at the same level as the faceplate. The tabs along the cage’s edge can be bent 90 degrees to secure the cage to the kit. Pass the radio antenna and wire loom cables through the cage. Place the installation piece into your dashboard.
A wire loom adaptor is used to connect the car radio wiring harness and the wires loom for the new stereo. The adaptor will connect the looms and you can click them into place. The radio antenna cable should be plugged into the port for the new radio.
Install the radio kit.
- A wire loom adaptor is used to connect the car radio wiring harness and the new stereo’s wire loom.
The wired radio should be fed into the radio installation box. Pull it into position until it clicks in. The car battery terminal negative must be connected. Now the stereo can be used.