Instructions For Range Powermax 155

Range Powermax 155, a thermal-store gas-electric boiler system that heats water, is available. It combines the best of both a boiler and hot water unit into one appliance. You can either set the time the unit will turn on or off during the day, but you cannot use any of the pre-programmed times. Children should not use this boiler system.

  • Range Powermax 155, a thermal-store gas-electric boiler system that heats water, is available.
  • Children should not use this boiler unit as it must be lit.

Click the “Set” button to set the programmer’s clock. You can select the day you want by using the “Plus”, “Minus”, and “Enter” buttons. To confirm your day settings, press the “Enter” button.

Select the appropriate time by using the “+”, “-” buttons. Select either “AM”, or “PM”. To quickly advance the time, press and hold both “+” or “-” keys.

To confirm the time press “Enter”, then click “Set” to exit the “Clock” menu.

  • To select the right time of the day, use the buttons “+” or “-“.
  • To confirm the time press “Enter”, then click “Set” to exit the “Clock” menu.

To select “Prog”, press the button “Set” twice.

To edit a specific day in the week, use the buttons “+” or “-“, then click the “Enter” button. Display will display “1 On”, followed by the time of that day’s initial run.

Set a new time when the unit turns on by pressing the “+” or “-” button. After pressing “Enter”, confirm your settings, and then press the “+”, “-” buttons for the “1 off” setting. To confirm that the setting is off, press “Enter”, then use the buttons to adjust the time for the second or third settings.

Turn the boiler on by switching the “On/Off” lever to ” If the burner is functioning, the flame will be lit up.

The “Advance” button can be used to jump to the next setting or to skip the currently active on/off setting. For an immediate cancel of the advance command or to revert to the prior on/off setting, again press “Advance”.

  • You can set a new time when the unit starts.
  • To skip to the next on/off setting, press the “Advance” button.

To cycle through all the program options, press the “HW Programme Select” button. To cycle through all the heating options, press the “CH Programme Select” button.