- The Hotbird satellite transmits hundreds of free-to-air and subscription satellite television and radio channels across Europe and North Africa.
- You can tune in the satellite receiver to Hotbird channels by accessing the “Setup” menu with the receiver’s remote control handset.
Switch on your TV set and satellite receiver. Tune the TV set to the correct channel for viewing the satellite receiver’s output.
Press the “Menu” key on the satellite television receiver’s remote control handset. Push the remote control’s “Up” and “Down” arrow buttons to select the “Setup” option.
Scroll to the “Tuning,” “Channel Scan” or “Add Channels” option. This label will vary depending on the make and model of the satellite receiver. Click the “OK” button on the remote control unit to select this option.
Scroll to and select “Hotbird 13degE” or “13degE” in the list of available satellites. Your satellite receiver will automatically display the list of satellites that you can receive. Wait for the satellite receiver to scan the Hotbird satellite for all available television and radio channels.
Select “Save all Channels” or “Save” from the onscreen prompt when the receiver completes the scan. This adds Hotbird channels to your receiver’s electronic program guide. Power down and restart the satellite receiver.
- Scroll to the “Tuning,” “Channel Scan” or “Add Channels” option.
- Select “Save all Channels” or “Save” from the onscreen prompt when the receiver completes the scan.
To view subscription channels on the Hotbird satellite, insert a subscription card for the channel provider into the card slot on the front of the receiver.
You can view free-to-air channels on Hotbird without a subscription card.