Before we proceed with the steps, let’s make sure you have all the necessary tools required for this DIY project. You’ll need an adjustable wrench, basin wrench, plumber’s putty, Teflon tape, screwdriver, and a new sink faucet.
Step 1: Turn off Water Supply
The first and foremost step is to turn off the water supply. You can do this by closing the shut-off valves located under the sink. If you don’t have shut-off valves, then you need to turn off the main water supply.
Step 2: Disconnect the Old Faucet
Now, you need to disconnect the old faucet. Start by removing the nuts and washers that hold the faucet in place. Use a basin wrench to loosen the nuts if they are hard to reach. Once you’ve removed the nuts, lift the old faucet and remove it.
Step 3: Clean the Sink Surface
Before installing the new faucet, you need to clean the sink surface thoroughly. Use a putty knife to remove any old plumber’s putty or debris. Clean the surface with a rag and some water.
Step 4: Install the New Faucet
Now, it’s time to install the new faucet. Apply some plumber’s putty on the base of the faucet and place it on the sink surface. Make sure it’s centered and aligned properly. Secure the faucet with the nuts and washers provided with the new faucet. Tighten the nuts with a basin wrench.
Step 5: Connect the Water Supply
Once the faucet is installed, you need to connect the water supply. Apply some Teflon tape on the threads of the water supply lines and connect them to the faucet. Tighten the nuts with an adjustable wrench.
Step 6: Turn on Water Supply
Finally, turn on the water supply and check for any leaks. If there are no leaks, then you’ve successfully changed your sink faucet.
Q: Do I need to hire a professional plumber to change my sink faucet?
No, you can easily change your sink faucet yourself with the right tools and some basic knowledge.
Q: How long does it take to change a sink faucet?
It usually takes around 30 minutes to an hour to change a sink faucet.
Q: Can I reuse the old nuts and washers?
It’s recommended to use new nuts and washers provided with the new faucet to ensure a secure and leak-free installation.
Q: Do I need to turn off the main water supply to change a sink faucet?
If you have shut-off valves under the sink, then you can turn them off. Otherwise, you need to turn off the main water supply.
Changing a sink faucet is a simple DIY project that can be done easily with the right tools and some basic knowledge. Follow the steps mentioned above, and you’ll have a new and functional sink faucet in no time. Don’t forget to turn off the water supply and check for any leaks before using the sink.