How To Wire Ring Doorbell

If you are looking to install a doorbell that can connect to your phone and give you the ability to see and talk to whoever is at your doorstep, then you should definitely consider the Ring Doorbell. In this article, we will walk you through step-by-step on how to wire Ring Doorbell.

What You Will Need

Before we dive into the wiring process, here are the things that you will need to get started: – Ring Doorbell – Screwdriver – Drill – Drill bit – Voltage tester – Wire strippers – Electric wires – Chime box (if you don’t have one)

Step 1: Turn off Power

Before you start wiring your Ring Doorbell, make sure to turn off the power to the doorbell from your circuit breaker. Once you have turned off the power, you can start removing the old doorbell from its place.

Step 2: Check Voltage

Using a voltage tester, check the voltage of the wires that are coming out of the wall. You should see a voltage of around 16-24 volts. If the voltage is too low or too high, then you will need to call an electrician to fix the issue.

Step 3: Attach Wires to Ring Doorbell

Once you have checked the voltage, you can start attaching the wires to the Ring Doorbell. Use wire strippers to strip the ends of the wires and then attach them to the terminals on the back of the doorbell. Make sure to attach the wires to the correct terminals (positive to positive and negative to negative).

Step 4: Mount Ring Doorbell

Using the screws that came with the Ring Doorbell, mount it onto the wall. Make sure that it is level and securely attached to the wall.

Step 5: Connect Chime Box

If you have a chime box, you will need to connect it to your Ring Doorbell. To do this, you will need to connect the wires from the chime box to the screws on the back of the Ring Doorbell.

Step 6: Turn on Power

Once you have connected the Ring Doorbell to the chime box (if applicable), you can turn the power back on. Test the doorbell to make sure that it is working properly.


Q: Can I install Ring Doorbell without existing doorbell wires?

Yes, you can install Ring Doorbell without existing doorbell wires by using the Ring Doorbell’s own battery.

Q: Can I use Ring Doorbell without a chime box?

Yes, you can use Ring Doorbell without a chime box. You will receive notifications on your phone when someone rings the doorbell.

Q: Can I connect Ring Doorbell to multiple devices?

Yes, you can connect Ring Doorbell to multiple devices. All you need to do is download the Ring app on each device and connect it to your Ring Doorbell.


Wiring Ring Doorbell might seem like a complicated process, but it is actually quite simple. By following the steps above, you can easily install your Ring Doorbell and enjoy its features. Remember to always turn off the power before starting any electrical work and to check the voltage of your wires before attaching them to the doorbell.